ROC-RK3328-CC-4GB 4GB RAM

Thương hiệu

OEM

Mô tả

Quad-Core 64-Bit Platform, nhân đồ họa GPU Mali-450MP2

0 Phản hồi

Yêu thích

0 Phản hồi

Yêu thích

Hết hàng

(Đặt mua để có hàng sớm)

Min: 1

Bội số: 1

Đơn vị bán: Cái

Số lượng	Đơn giá	Thành tiền
1+	1,990,000 đ	1,990,000 đ

Thông số kỹ thuật

Sản phẩm tương tự

Thuộc tính	Giá trị	Tìm kiếm
Danh mục	Freescale
RoHS
0 Sản phẩm tương tự

Thông số kỹ thuật

Thuộc tính	Giá trị	Tìm kiếm
Danh mục	Freescale
RoHS
0 Sản phẩm tương tự

Mô tả sản phẩm

Bo mạch ROC-RK3328-CC-4GB được thiết kế như một giải pháp thay thế phần cứng cho Raspberry Pi 3 Model B và cung cấp hiệu suất nhanh hơn, nhiều bộ nhớ hơn, năng lượng thấp hơn, thông lượng IO cao hơn, khả năng 4K, các thành phần thị trường mở, tăng tốc phương tiện được cải thiện, loại bỏ giao diện bị khóa của nhà cung cấp và Hỗ trợ Android 7.1.

Nền tảng này sử dụng các công nghệ mới nhất và được xây dựng dựa trên các chip có sẵn lâu dài đã được kiểm chứng. Nó được hỗ trợ bởi Linux ngược dòng và có gói phát triển hạ nguồn dựa trên Linux 4.9 LTS cung cấp giải mã phương tiện 4K sẵn sàng hoạt động, tăng tốc 3D,...

Nó có thể được sử dụng để mày mò thiết bị điện tử, dạy lập trình, xây dựng trung tâm truyền thông, tạo giải pháp biển báo kỹ thuật số, chơi trò chơi cổ điển, thiết lập video hai chiều và mở khóa trí tưởng tượng. Nó có sẵn ở các cấu hình 1GB, 2GB và 4GB trong khi sử dụng hệ sinh thái cộng tác lớn hiện có của các bộ phận để người sáng tạo xây dựng các sản phẩm và dịch vụ mới và thú vị.

Thông số kỹ thuật:

Rockchip RK3328 4 nhân, phát triển dựa trên Cortex A53
Nhân đồ họa GPU Mali-450MP2
1/2/4GB RAM LPDDR3 bus 1866 MHz
Có khe micro SD hỗ trợ thẻ nhớ
Cổng HDMI 2.0a hỗ trợ nội dung 4K @ 60 Hz và HDR10, HLG
Giắc cắm tai nghe 3,5mm có khả năng truyền âm thanh stereo và tiếng của video
Hộ trợ định dạng 4K VP9, H.265 và H.264, 1080p VC-1, MPEG-1/2/4, VP6/8
Cổng Gigabit Ethernet
2 cổng USB 2.0, 1 cổng USB 3.0
Cổng hồng ngoại, cổng nguồn, nút khởi động lại và nút hồi phục
Máy hỗ trợ nhiều giao diện, bao gồm cả Pi-2 Bus và Pi-P5+ Bus
Kích thước: 85 x 56mm

Tạo thẻ SD Linux

Prepare

ROC-RK3328-CC Development board
Firmware
Linux Host Computer

Please refer to 《Build Kernel》 and 《Build Ubuntu Rfs》 instructions to compile partition images, or you can download here to obtain a unified firmware.

Process of Making Linux Boot Card

using SDCard Installer tools for windows

For windows users, you can select SDCard Installer tool Download link of tool:SDCard Installer

The SDCard Installer tool will be able to download ,burn and write the fireware in place,and the operation is simple and straightforward.

1、After inserting the SD card into the computer, open SDCard Installer.

2、Click the "Choose an OS"button, After selecting ROC-RK3328-CC,display the figure.

JX4O(T751I{B6%FYD%AJVZ7.png

3、As shown in the figure, there are five choices:
1) if there is no demand operating system in the local area, you need to download and select the operating system you need. Click OK.
2) if there is a local operating system with requirements, after clicking Browse image, select the system and click OK.

4、After completing the above steps, the computer also recognizes the SD card, clicks FLASH, and waits for completion.

GGDXRK@6O0SSKJZM_2K9U$H.png

Note: when the burn is completed to 99% or 100%, the following picture is presented, which can be ignored, and does not affect the firmware burning on the SD card.

UE5C%VXUF@LJGEV8JQ[`})1.png

5、After finishing the burn, the SD card will be removed from the computer and inserted into the TF card slot of rk3328,restart rk3328 is OK.

using scripts to make

you need to use Linux dd command to write the startup files into the SD card, the steps are as follows:

Compile the kernel ,and u-boot:

see 《Build Kernel》

Make Ubuntu rootfs

see 《Build Ubuntu Rfs》

Synthesis system.img file for the production of the boot card in the next step

build/mk-image.sh -c rk3328 -t system -r rk-rootfs-build/linaro-rootfs.img

Run the following command to write the unified firmware system.img generated above into the SD card:

build/flash_tool.sh -c rk3328 -d /dev/sdb -p system -i out/system.img

using dd command to make

Here you also need to insert the SD card to the computer

Run the following command to write the unified firmware system.img into the SD card:

pv -tpreb out/system.img | sudo dd of=/dev/sdb seek=0 conv=notrunc && sync

You can also run the following commands to write a partitioned image into an SD card

sudo dd if=./out/u-boot/idbloader.img of=/dev/sdb seek=64      
conv=sync,fsync  sudo dd if=./out/u-boot/uboot.img     
of=/dev/sdb seek=16384   conv=sync,fsync sudo dd if=./out/u-boot/trust.img     
of=/dev/sdb seek=24576   conv=sync,fsync sudo dd if=./out/boot.img             
of=/dev/sdb seek=32768   conv=sync,fsync sudo dd if=./out/linaro-rootfs.img    
of=/dev/sdb seek=262144  conv=sync,fsync

Tạo thẻ SD Android

Prepare

ROC-RK3328-CC Development board
Firmware
Linux Host Computer

Please refer to 《Build Kernel》 and 《Build Ubuntu Rfs》 instructions to compile partition images, or you can download here to obtain a unified firmware.

Process of Making Linux Boot Card

using SDCard Installer tools for windows

For windows users, you can select SDCard Installer tool Download link of tool:SDCard Installer

The SDCard Installer tool will be able to download ,burn and write the fireware in place,and the operation is simple and straightforward.

1、After inserting the SD card into the computer, open SDCard Installer.

2、Click the "Choose an OS"button, After selecting ROC-RK3328-CC,display the figure.

JX4O(T751I{B6%FYD%AJVZ7.png

4、After completing the above steps, the computer also recognizes the SD card, clicks FLASH, and waits for completion.

GGDXRK@6O0SSKJZM_2K9U$H.png

Note: when the burn is completed to 99% or 100%, the following picture is presented, which can be ignored, and does not affect the firmware burning on the SD card.

UE5C%VXUF@LJGEV8JQ[`})1.png

5、After finishing the burn, the SD card will be removed from the computer and inserted into the TF card slot of rk3328,restart rk3328 is OK.

using scripts to make

you need to use Linux dd command to write the startup files into the SD card, the steps are as follows:

Compile the kernel ,and u-boot:

see 《Build Kernel》

Make Ubuntu rootfs

see 《Build Ubuntu Rfs》

Synthesis system.img file for the production of the boot card in the next step

build/mk-image.sh -c rk3328 -t system -r rk-rootfs-build/linaro-rootfs.img

Run the following command to write the unified firmware system.img generated above into the SD card:

build/flash_tool.sh -c rk3328 -d /dev/sdb -p system -i out/system.img

using dd command to make

Here you also need to insert the SD card to the computer

Run the following command to write the unified firmware system.img into the SD card:

pv -tpreb out/system.img | sudo dd of=/dev/sdb seek=0 conv=notrunc && sync

You can also run the following commands to write a partitioned image into an SD card

sudo dd if=./out/u-boot/idbloader.img of=/dev/sdb seek=64      
conv=sync,fsync  sudo dd if=./out/u-boot/uboot.img     
of=/dev/sdb seek=16384   conv=sync,fsync sudo dd if=./out/u-boot/trust.img     
of=/dev/sdb seek=24576   conv=sync,fsync sudo dd if=./out/boot.img             
of=/dev/sdb seek=32768   conv=sync,fsync sudo dd if=./out/linaro-rootfs.img    
of=/dev/sdb seek=262144  conv=sync,fsync

Phản hồi (0)

Hết hàng

(Đặt mua để có hàng sớm)

Min: 1

Bội số: 1

Đơn giá

1,990,000 đ

Thành tiền

1,990,000 đ

Đơn vị bán: Cái

Số lượng	Đơn giá	Thành tiền
1+	1,990,000 đ	1,990,000 đ

Copy thành công

Số lượng	Đơn giá	Thành tiền
1+	1,990,000 đ	1,990,000 đ

Thông số kỹ thuật

Sản phẩm tương tự

Thuộc tính	Giá trị	Tìm kiếm
Danh mục	Freescale
RoHS
0 Sản phẩm tương tự

Thông số kỹ thuật

Thuộc tính	Giá trị	Tìm kiếm
Danh mục	Freescale
RoHS
0 Sản phẩm tương tự

Mô tả sản phẩm

Thông số kỹ thuật:

Rockchip RK3328 4 nhân, phát triển dựa trên Cortex A53
Nhân đồ họa GPU Mali-450MP2
1/2/4GB RAM LPDDR3 bus 1866 MHz
Có khe micro SD hỗ trợ thẻ nhớ
Cổng HDMI 2.0a hỗ trợ nội dung 4K @ 60 Hz và HDR10, HLG
Giắc cắm tai nghe 3,5mm có khả năng truyền âm thanh stereo và tiếng của video
Hộ trợ định dạng 4K VP9, H.265 và H.264, 1080p VC-1, MPEG-1/2/4, VP6/8
Cổng Gigabit Ethernet
2 cổng USB 2.0, 1 cổng USB 3.0
Cổng hồng ngoại, cổng nguồn, nút khởi động lại và nút hồi phục
Máy hỗ trợ nhiều giao diện, bao gồm cả Pi-2 Bus và Pi-P5+ Bus
Kích thước: 85 x 56mm

Tạo thẻ SD Linux

Prepare

ROC-RK3328-CC Development board
Firmware
Linux Host Computer

Please refer to 《Build Kernel》 and 《Build Ubuntu Rfs》 instructions to compile partition images, or you can download here to obtain a unified firmware.

Process of Making Linux Boot Card

using SDCard Installer tools for windows

For windows users, you can select SDCard Installer tool Download link of tool:SDCard Installer

The SDCard Installer tool will be able to download ,burn and write the fireware in place,and the operation is simple and straightforward.

1、After inserting the SD card into the computer, open SDCard Installer.

2、Click the "Choose an OS"button, After selecting ROC-RK3328-CC,display the figure.

JX4O(T751I{B6%FYD%AJVZ7.png

4、After completing the above steps, the computer also recognizes the SD card, clicks FLASH, and waits for completion.

GGDXRK@6O0SSKJZM_2K9U$H.png

Note: when the burn is completed to 99% or 100%, the following picture is presented, which can be ignored, and does not affect the firmware burning on the SD card.

UE5C%VXUF@LJGEV8JQ[`})1.png

5、After finishing the burn, the SD card will be removed from the computer and inserted into the TF card slot of rk3328,restart rk3328 is OK.

using scripts to make

you need to use Linux dd command to write the startup files into the SD card, the steps are as follows:

Compile the kernel ,and u-boot:

see 《Build Kernel》

Make Ubuntu rootfs

see 《Build Ubuntu Rfs》

Synthesis system.img file for the production of the boot card in the next step

build/mk-image.sh -c rk3328 -t system -r rk-rootfs-build/linaro-rootfs.img

Run the following command to write the unified firmware system.img generated above into the SD card:

build/flash_tool.sh -c rk3328 -d /dev/sdb -p system -i out/system.img

using dd command to make

Here you also need to insert the SD card to the computer

Run the following command to write the unified firmware system.img into the SD card:

pv -tpreb out/system.img | sudo dd of=/dev/sdb seek=0 conv=notrunc && sync

You can also run the following commands to write a partitioned image into an SD card

sudo dd if=./out/u-boot/idbloader.img of=/dev/sdb seek=64      
conv=sync,fsync  sudo dd if=./out/u-boot/uboot.img     
of=/dev/sdb seek=16384   conv=sync,fsync sudo dd if=./out/u-boot/trust.img     
of=/dev/sdb seek=24576   conv=sync,fsync sudo dd if=./out/boot.img             
of=/dev/sdb seek=32768   conv=sync,fsync sudo dd if=./out/linaro-rootfs.img    
of=/dev/sdb seek=262144  conv=sync,fsync

Tạo thẻ SD Android

Prepare

ROC-RK3328-CC Development board
Firmware
Linux Host Computer

Please refer to 《Build Kernel》 and 《Build Ubuntu Rfs》 instructions to compile partition images, or you can download here to obtain a unified firmware.

Process of Making Linux Boot Card

using SDCard Installer tools for windows

For windows users, you can select SDCard Installer tool Download link of tool:SDCard Installer

The SDCard Installer tool will be able to download ,burn and write the fireware in place,and the operation is simple and straightforward.

1、After inserting the SD card into the computer, open SDCard Installer.

2、Click the "Choose an OS"button, After selecting ROC-RK3328-CC,display the figure.

JX4O(T751I{B6%FYD%AJVZ7.png

4、After completing the above steps, the computer also recognizes the SD card, clicks FLASH, and waits for completion.

GGDXRK@6O0SSKJZM_2K9U$H.png

Note: when the burn is completed to 99% or 100%, the following picture is presented, which can be ignored, and does not affect the firmware burning on the SD card.

UE5C%VXUF@LJGEV8JQ[`})1.png

5、After finishing the burn, the SD card will be removed from the computer and inserted into the TF card slot of rk3328,restart rk3328 is OK.

using scripts to make

you need to use Linux dd command to write the startup files into the SD card, the steps are as follows:

Compile the kernel ,and u-boot:

see 《Build Kernel》

Make Ubuntu rootfs

see 《Build Ubuntu Rfs》

Synthesis system.img file for the production of the boot card in the next step

build/mk-image.sh -c rk3328 -t system -r rk-rootfs-build/linaro-rootfs.img

Run the following command to write the unified firmware system.img generated above into the SD card:

build/flash_tool.sh -c rk3328 -d /dev/sdb -p system -i out/system.img

using dd command to make

Here you also need to insert the SD card to the computer

Run the following command to write the unified firmware system.img into the SD card:

pv -tpreb out/system.img | sudo dd of=/dev/sdb seek=0 conv=notrunc && sync

You can also run the following commands to write a partitioned image into an SD card

sudo dd if=./out/u-boot/idbloader.img of=/dev/sdb seek=64      
conv=sync,fsync  sudo dd if=./out/u-boot/uboot.img     
of=/dev/sdb seek=16384   conv=sync,fsync sudo dd if=./out/u-boot/trust.img     
of=/dev/sdb seek=24576   conv=sync,fsync sudo dd if=./out/boot.img             
of=/dev/sdb seek=32768   conv=sync,fsync sudo dd if=./out/linaro-rootfs.img    
of=/dev/sdb seek=262144  conv=sync,fsync

Mô tả sản phẩm

Thông số kỹ thuật:

Rockchip RK3328 4 nhân, phát triển dựa trên Cortex A53
Nhân đồ họa GPU Mali-450MP2
1/2/4GB RAM LPDDR3 bus 1866 MHz
Có khe micro SD hỗ trợ thẻ nhớ
Cổng HDMI 2.0a hỗ trợ nội dung 4K @ 60 Hz và HDR10, HLG
Giắc cắm tai nghe 3,5mm có khả năng truyền âm thanh stereo và tiếng của video
Hộ trợ định dạng 4K VP9, H.265 và H.264, 1080p VC-1, MPEG-1/2/4, VP6/8
Cổng Gigabit Ethernet
2 cổng USB 2.0, 1 cổng USB 3.0
Cổng hồng ngoại, cổng nguồn, nút khởi động lại và nút hồi phục
Máy hỗ trợ nhiều giao diện, bao gồm cả Pi-2 Bus và Pi-P5+ Bus
Kích thước: 85 x 56mm

Tạo thẻ SD Linux

Prepare

ROC-RK3328-CC Development board
Firmware
Linux Host Computer

Please refer to 《Build Kernel》 and 《Build Ubuntu Rfs》 instructions to compile partition images, or you can download here to obtain a unified firmware.

Process of Making Linux Boot Card

using SDCard Installer tools for windows

For windows users, you can select SDCard Installer tool Download link of tool:SDCard Installer

The SDCard Installer tool will be able to download ,burn and write the fireware in place,and the operation is simple and straightforward.

1、After inserting the SD card into the computer, open SDCard Installer.

2、Click the "Choose an OS"button, After selecting ROC-RK3328-CC,display the figure.

JX4O(T751I{B6%FYD%AJVZ7.png

4、After completing the above steps, the computer also recognizes the SD card, clicks FLASH, and waits for completion.

GGDXRK@6O0SSKJZM_2K9U$H.png

Note: when the burn is completed to 99% or 100%, the following picture is presented, which can be ignored, and does not affect the firmware burning on the SD card.

UE5C%VXUF@LJGEV8JQ[`})1.png

5、After finishing the burn, the SD card will be removed from the computer and inserted into the TF card slot of rk3328,restart rk3328 is OK.

using scripts to make

you need to use Linux dd command to write the startup files into the SD card, the steps are as follows:

Compile the kernel ,and u-boot:

see 《Build Kernel》

Make Ubuntu rootfs

see 《Build Ubuntu Rfs》

Synthesis system.img file for the production of the boot card in the next step

build/mk-image.sh -c rk3328 -t system -r rk-rootfs-build/linaro-rootfs.img

Run the following command to write the unified firmware system.img generated above into the SD card:

build/flash_tool.sh -c rk3328 -d /dev/sdb -p system -i out/system.img

using dd command to make

Here you also need to insert the SD card to the computer

Run the following command to write the unified firmware system.img into the SD card:

pv -tpreb out/system.img | sudo dd of=/dev/sdb seek=0 conv=notrunc && sync

You can also run the following commands to write a partitioned image into an SD card

sudo dd if=./out/u-boot/idbloader.img of=/dev/sdb seek=64      
conv=sync,fsync  sudo dd if=./out/u-boot/uboot.img     
of=/dev/sdb seek=16384   conv=sync,fsync sudo dd if=./out/u-boot/trust.img     
of=/dev/sdb seek=24576   conv=sync,fsync sudo dd if=./out/boot.img             
of=/dev/sdb seek=32768   conv=sync,fsync sudo dd if=./out/linaro-rootfs.img    
of=/dev/sdb seek=262144  conv=sync,fsync

Tạo thẻ SD Android

Prepare

ROC-RK3328-CC Development board
Firmware
Linux Host Computer

Please refer to 《Build Kernel》 and 《Build Ubuntu Rfs》 instructions to compile partition images, or you can download here to obtain a unified firmware.

Process of Making Linux Boot Card

using SDCard Installer tools for windows

For windows users, you can select SDCard Installer tool Download link of tool:SDCard Installer

The SDCard Installer tool will be able to download ,burn and write the fireware in place,and the operation is simple and straightforward.

1、After inserting the SD card into the computer, open SDCard Installer.

2、Click the "Choose an OS"button, After selecting ROC-RK3328-CC,display the figure.

JX4O(T751I{B6%FYD%AJVZ7.png

4、After completing the above steps, the computer also recognizes the SD card, clicks FLASH, and waits for completion.

GGDXRK@6O0SSKJZM_2K9U$H.png

Note: when the burn is completed to 99% or 100%, the following picture is presented, which can be ignored, and does not affect the firmware burning on the SD card.

UE5C%VXUF@LJGEV8JQ[`})1.png

5、After finishing the burn, the SD card will be removed from the computer and inserted into the TF card slot of rk3328,restart rk3328 is OK.

using scripts to make

you need to use Linux dd command to write the startup files into the SD card, the steps are as follows:

Compile the kernel ,and u-boot:

see 《Build Kernel》

Make Ubuntu rootfs

see 《Build Ubuntu Rfs》

Synthesis system.img file for the production of the boot card in the next step

build/mk-image.sh -c rk3328 -t system -r rk-rootfs-build/linaro-rootfs.img

Run the following command to write the unified firmware system.img generated above into the SD card:

build/flash_tool.sh -c rk3328 -d /dev/sdb -p system -i out/system.img

using dd command to make

Here you also need to insert the SD card to the computer

Run the following command to write the unified firmware system.img into the SD card:

pv -tpreb out/system.img | sudo dd of=/dev/sdb seek=0 conv=notrunc && sync

You can also run the following commands to write a partitioned image into an SD card

sudo dd if=./out/u-boot/idbloader.img of=/dev/sdb seek=64      
conv=sync,fsync  sudo dd if=./out/u-boot/uboot.img     
of=/dev/sdb seek=16384   conv=sync,fsync sudo dd if=./out/u-boot/trust.img     
of=/dev/sdb seek=24576   conv=sync,fsync sudo dd if=./out/boot.img             
of=/dev/sdb seek=32768   conv=sync,fsync sudo dd if=./out/linaro-rootfs.img    
of=/dev/sdb seek=262144  conv=sync,fsync

Phản hồi (0)

02836225798

Giờ mở cửa

Công ty TNHH Linh Kiện X. GPĐKKD: 0318611096 do sở KH & ĐT TP.HCM cấp ngày 08/08/2024

28 Hàn Thuyên, Bình Thọ, Thủ Đức, HCM

02836225798

info@linhkienx.com

Giờ mở cửa

Bản đồ

Linh Kiện điện tử

Đặt mạch PCB

02836225798

0388724758

Công ty TNHH Linh Kiện X. GPĐKKD: 0318611096 do sở KH & ĐT TP.HCM cấp ngày 08/08/2024

28 Hàn Thuyên, Bình Thọ, Thủ Đức, HCM

info@linhkienx.com

ROC-RK3328-CC-4GB 4GB RAM

Thông số kỹ thuật

Mô tả sản phẩm

Tạo thẻ SD Linux

Prepare

Process of Making Linux Boot Card

using SDCard Installer tools for windows

using scripts to make

using dd command to make

Tạo thẻ SD Android

Prepare

Process of Making Linux Boot Card

using SDCard Installer tools for windows

using scripts to make

using dd command to make

Phản hồi (0)

Thông số kỹ thuật

Mô tả sản phẩm

Tạo thẻ SD Linux

Prepare

Process of Making Linux Boot Card

using SDCard Installer tools for windows

using scripts to make

using dd command to make

Tạo thẻ SD Android

Prepare

Process of Making Linux Boot Card

using SDCard Installer tools for windows

using scripts to make

using dd command to make

Prepare

Process of Making Linux Boot Card

using SDCard Installer tools for windows

using scripts to make

using dd command to make

Prepare

Process of Making Linux Boot Card

using SDCard Installer tools for windows

using scripts to make

using dd command to make

Phản hồi (0)

Công ty TNHH Linh Kiện X. GPĐKKD: 0318611096 do sở KH & ĐT TP.HCM cấp ngày 08/08/2024

Chấp nhận thanh toán